Daily Care Instructions

CLOTH PART

• Brush the surface gently with a soft brush or tap it softly, then vacuum to remove dust and avoid damaging the cloth.

• When it gets dirty after an extended period, wipe with a well-wrung soft cloth moistened with thin neutral detergent. Wipe clean with a damp cloth. Be sure to wipe the detergent completely and wipe again with a dry cloth to dry it.

• When using alkaline electrolyzed water to remove stains, spray directly on the stain and brush with a soft brush to avoid damaging the cloth. Then, wipe the moisture and stain to remove and wait for the fabric to dry.

• When it gets an oily stain, immediately dab and remove it using a dedicated stain remover. Then wipe with a soft cloth dampened with water, followed by a dry cloth to dry. Stains may be permanent depending on the material.

Please be careful

Please do not leave the product with moisture remaining on it. Do not clean the product with organic solvents such as thinner, benzene, or a cloth containing chemicals. Be aware that once discoloration or deterioration occurs, it cannot be reverted to its original state.

Do not use hypochlorous acid water. Failure may cause the color or texture of the surface to deteriorate.

LEATHER PART

• Wipe off with a dry, soft, clean cloth.

• If you spill any liquid, immediately wipe it with a dry cloth. If the stain does not come off, soak a cloth in warm water, wring it out tightly, and then use it to wipe the area.

• Vinyl leather (alcohol-resistant, sodium hypochlorite-resistant) part

• Soak a cloth in water, wring it out thoroughly, wipe the surface with it, and then dry it with a dry cloth.

• If dirt is noticed, immediately wipe it off with a well-wrung soft cloth moistened with thin neutral detergent. Be sure to remove the detergent completely with a damp cloth and wipe again with a dry cloth to dry it.

• After disinfecting with alcohol or a sodium hypochlorite solution, wipe off any remaining disinfectant with a moist cloth, then wipe with a dry cloth to ensure proper drying.

Please be careful

Do not use an organic solvent such as thinner or benzene, hypochlorous acid water, a chemical cloth, or a shoe cleaner for the vinyl leather part. If the color or texture of the vinyl leather part deteriorates, it cannot be restored to its original state.

Do not leave liquid disinfectant residue on the surface. Doing so could result in discoloration and deformation.

Disinfecting more frequently or at higher concentrations than necessary may result in discoloration, deformation, or accelerated undesired stiffness.

Be sure to abide by the procedure and amount specified for your disinfectant.

VINYL LEATHER PART

Soak a cloth in water, wring it out thoroughly, wipe the surface with it, and then dry it with a dry cloth.

If dirt is noticed, immediately wipe it off with a well-wrung soft cloth moistened with thin neutral detergent. Be sure to remove the detergent completely with a damp cloth and wipe again with a dry cloth to dry it.

Please be careful

Do not use an organic solvent such as thinner or benzene, alcohol, sodium hypochlorite, hypochlorous acid water, a chemical cloth, or a shoe cleaner for the vinyl leather part. If the color or texture of the vinyl leather part deteriorates, it cannot be restored to its original state.

ALUMINUM / STEEL PARTS

• Wipe off with a dry, soft clean cloth.

• Immediately wipe off any water.

• Immediately wipe off any dust or fingerprints (sebum).

GLASS PART

Wipe off with a dry, soft, clean cloth.

Immediately wipe off any water.

Immediately wipe off any dust or fingerprints (sebum).

NATURAL WOOD PART

• Gently wipe with a clean, dry, and soft cloth toward the grain.

• When it gets exceptionally dirty, wipe off the dirt with a well-wrung, moistened, soft cloth, then wipe again with a dry cloth to dry it.

Please be careful

Please do not use the following items, as they will damage the coating. Thinner, benzene, alcohol, lacquer, oil, vinegar, boiling water, polishing powder, etc.

Do not frequently wipe with a moist cloth, as this may result in cracks in the wood portion.

RAISIN PART

• Wipe with a well-wrung soft cloth, moistened.

• 
  

• If dirt is noticeable, wipe it off with a well-wrung soft cloth moistened with thin neutral detergent. Be sure to obliterate detergent with a damp cloth and wipe again with a dry cloth to dry it.

Please be careful

Do not rub hard. Failure will cause flashing to change the viewed color. Wiping it off with a soft cloth impregnated with alcohol for hand disinfection when the dirt cannot be removed,

Do not use any alkaline or acidic cleaning agents.

When cleaning the table surface, avoid letting cleaning agents seep into the gaps between the decorative laminate (such as melamine) and edging

WHITEBOARD PART

If it is difficult to clean the surface, wipe it with a damp cloth that has been wrung out tigh

Please be careful

• Please avoid cleaning with detergent etc., as it may cause dirt to adhere. Also, never wipe with organic solvents such as benzene or thinners.

• Do not use polishing powder or a scrubbing brush to clean, as it will damage the surface finish.